by katyspring | May 22, 2023 | Blog, Videos
This torsion spring is made from .022 3000 series stainless steel. The spring is used in a scientific application. Springs like this are made on a CNC wire bender which promotes speed, consistency, and repeatability. Does your company purchase custom torsion springs...
by katyspring | May 16, 2023 | Blog, Videos
Katy Spring’s new LS-20000 preset machine information. – Cycle testing up to 4000 lbs.- Presetting up to 4000 lbs.- CNC capable Cycle testing springs is deflecting a spring over the course of a given amount of time at a certain rate that provides documentation...
by katyspring | May 8, 2023 | Blog, Videos
Check out our new secondary CNC bender with the following features: Bending capacity of over 1/2″ solid steel rod, Continuous rotation for performing simple coiling jobs winding, and short run torsion springs, Repeatable extremely accurate position to +/- .01...
by katyspring | Sep 21, 2022 | Blog, Videos
Katy Spring makes many different types of custom wire forms. We have CNC machines, like the one shown in this video, that can manufacture custom wire forms from wire sizes .020” to .195”. This wire form has several bends which would be very expensive to make by hand....
by katyspring | Aug 15, 2022 | Blog, Videos
Stress relieving springs is the most common form of heat-treating springs. This video shows two large batch ovens used for stress relieving larger springs in large batch quantities. Smaller springs can be stress relieved in an in-line furnace. If not properly stress...
by katyspring | Jul 13, 2022 | Blog, Videos
Most springs made from carbon wire are stress relieved at a temperature of 600 degrees F for a minimum of 30 minutes. Stress relieving, or “normalizing” as it’s sometimes referred to, allows the spring to relax or be relieved of stress, thereby holding its physical...
