Compression Springs · Level 1 of 3 · Interactive Checklist

Compression Spring
Design Checklist

A practical starting point to gather the right inputs before requesting a quote. Use it to define your application, constraints, and key specifications — so you can move faster with fewer revisions.

0 / 0 items complete
Not started
Checklist Complete! Ready for a quote?
You've gathered all the key information. Submit it to our team for a fast, accurate quote.
Get a Quote →
A
Application Information
0/0
What is the spring used for?
Describe the function: valve actuation, return mechanism, load bearing, energy storage, etc.
What product or equipment will the spring be installed in?
Industry context helps guide material and performance decisions.
Is this a new design or a replacement spring?
Replacement springs may have an existing part number or sample to reference.
B
Environment
0/0
Indoor or outdoor operating environment?
Outdoor environments often require corrosion-resistant materials.
Exposure to moisture, chemicals, salt, or other corrosives?
Specify chemical type if known — this drives material and coating selection.
Expected operating temperature range?
High temperatures affect material choice — Chrome Silicon and Inconel for extreme heat.
Any electrical conductivity requirements?
Phosphor Bronze or Beryllium Copper may be required for electrically conductive springs.
C
Installation Configuration
0/0
Does the spring work inside a hole (Works In)?
If yes, provide the bore diameter for proper OD clearance calculation.
Does the spring work over a shaft or pin (Works Over)?
If yes, provide the shaft diameter for proper ID clearance calculation.
Bore diameter or shaft diameter is documented?
Even an approximate value helps our team start the clearance calculation.
D
Dimensional Requirements
0/0
Free Length (L₀)
Overall length of the spring in its unloaded state. One of the most critical dimensions.
Outside Diameter (OD)
Maximum external diameter of the spring coil.
Inside Diameter (ID)
Clear internal diameter — critical when spring works over a shaft.
Wire Diameter (d)
Thickness of the wire used to form the spring. Affects rate, strength, and fatigue life.
Total Coils (Nₜ)
Total number of coils including end coils (if known).
End Type specified (Closed & Ground or Closed & Unground)?
Ground ends provide better perpendicularity and load distribution for precision applications.
E
Motion & Travel
0/0
Installed Height documented?
The height at which the spring is pre-compressed during installation.
Maximum Compressed Height documented?
The shortest height the spring reaches during operation. Must remain above solid height.
Maximum Travel (deflection) documented?
Determines working stress, fatigue life, and solid height limitations.
F
Force Requirements
0/0
One or more load points provided (Height → Load)?
Example load points allow our engineers to calculate the required spring rate.
HeightLoad
2.500" 40 lb
2.000" 70 lb
Spring Rate specified (lb/in or N/mm)?
If you know the desired stiffness rather than specific load points, the rate can be specified directly.
G
Additional Design Considerations
0/0
Wind direction requirement noted (Right-Hand, Left-Hand, or Optional)?
Specify Optional if not functionally critical — gives manufacturer maximum flexibility.
Quantity requirements documented (prototype, production, blanket order)?
Volume affects pricing, tooling decisions, and lead time commitments.
H
Finish / Coating Requirements
0/0
Surface finish or coating requirement identified (or confirmed as bare)?
Optional finishes include:
Shot Peening Zinc Plating Nickel Plating Passivation Powder Coating Wet Paint Bead Blasting
Ready to send your specs?
Submit the form and our engineering team will respond within one business day.
Request a Quote →